How to Prevent Temporary Fences from Tipping?


Temporary fences are effortless to configure and remove and are widely used by property owners to demark their boundaries. They are easy options for organizing short-term events and keeping people and animals away from wandering. Apart from creating boundaries on the property, temporary fences help keep away the folks from construction sites and units.

Temporary Fences

Theft prevention, crowd control, and security are benefits of temporary fencing. However, these portable fences tend to lean after some years of use. This learning results from various uncontrollable factors and must be tackled promptly to prevent further damage.

Often, repairing or replacing the existing temporary fences puts the homeowners in a dilemma. This phenomenon is most common with wooden walls. A slight lean or bent in these types of fences requires immediate remedial. Here are some of the ways that will help you in dealing with leaned temporary fences. Could you have a look at them?

1. Make Use of Right Products:

Mostly, the fences get leaned due to winds and thunderstorms. Therefore, while choosing the walls, ensure the mesh is adequately and firmly installed. The bars must be installed in high-wind areas; the meshes should be perforated to allow the wind to pass through them.

Considerably, if you do not use special wind meshes, the fences in your yard may be blown down frequently. This further results in the damaged fence line and provides a nasty look to nearby areas.

2. Go for Regular Maintenance:

Temporary fences should be properly maintained. Cracks or breaks, if any, should not be left for the future and must be addressed timely.

In addition to using the right mesh and fencing materials, the underlying factors responsible for its installation should be considered. Such factors as the softness of soil and the climatic conditions of the areas where they need to be installed should be given due importance.

Further, if you cannot handle the maintenance, then you should call for the assistance of a temporary fencing company.

3. Install the Meshes Properly:

As discussed above, areas with strong and heavy winds should have fences with perforated meshes. Hence, it is essential to get the meshes installed correctly. Some meshes are metallic, while some are cable ties.

The meshes should be installed correctly to avoid the leaning and cracking of the temporary fences.

4. Get the Defects Repaired Timely:

The best way to look for possible repairs is to check the integrity of the horizontal rails. Rails are sturdy enough to hold a nail, so they might need to be repaired. If the fences are completely damaged without any scope of small repairs, then it is mandatory to get a total replacement.

5. Choose the Right Type of Fencing Options:

Before you choose a fence for your yard, you should pay attention to the materials used and the environment of the place. The environmental conditions, such as the nature of winds and the type of soil, greatly influence the longevity of the fencing options.

Meshes with small holes cannot withstand high wind conditions. Inappropriate installation of the fences on the wrong surface can lead to frequent leaning and breakdown of the walls.

6. Get the Installation Done by Professionals:

Temporary fence installation is not an easy task. You cannot install the tools and equipment until you have the right set of tools and equipment. Despite undertaking it as a DIY project, you should always hire professionals to do the job for you.